Zappa Rail Fencing

Yes, Think Fencing can make almost any gate design you want, Swing gates can be made up-to 2.4m each panel and sliding gates can be made up-to 6m long! All gates come with hardware made by [...]

All of Think Fencing’s coloured products are made from a PVC acrylic composite, the PVC makes up the structure of the profile and the Acrylic capping layer provides the colour. This is very [...]

Using a Knife, strip away 20mm of conductive plastic exposing the wire inside. Using a wire joiner screw your active wire from your electric fence energizer into the exposed wire. Make sure your [...]

Zappa Rail and Equirail can be easily joined with our Stainless Steel Joining bracket. Alternatively Zappa Rail can be joined using 2 Gripples.

After you have installed your posts and strainer assembly you bolt your Insul-Strainer to your end post and slide the Zappa Rail into it. Using a Shifting Spanner or 20mm Spanner crank the [...]

First mark out the correct Gatepost location. Place the post in the hole and mark out the hinge location. Fit the hinge to the post making sure you have sufficient adjustment to correctly [...]

First mark out the correct post spacing. Next augur or dig a hole 300mm wide by 650mm deep. Fill the hole with a wet mix concrete mix and push the post into the concrete mix allowing the mix to [...]

Think Fencing has been manufacturing PVC composite fencing for over a decade in Australia and has tested its fencing systems in the harshest of conditions. Think Fencing employs modern [...]