Think Fencing will always round up your requirements to the next panel ensuring you have enough materials for your job. All PVC components can be cut using a hack-saw, or aluminium cutting blade [...]
Picket, Horizontal Slat and Post & Rail fences have a crimp on the rail and pickets facing outward. The crimp is designed to allow you to push the rail into the post but not pull out. Think [...]
Our fences are suitable for DIY. The most challenging part is to concrete posts into the ground and level the fence. After that everything simply “locks in”. Any fencing contractor or “handy” [...]
If the fence is to be installed around a corner with an angle between 0 – 45 degree the rail slot width can be increased using a rasp to allow for great angle or have Think Fencing provide [...]
Standard fencing provided by Think Fencing can already accommodate a 1.0 degree rake. Anything larger than this will require increasing the length of the slot by rasping it out on site or have [...]
The colours we use on our fencing products are not just a coating, they are a specific layer of Mechanically and Chemically bonded polymer that has been incorporated into the profile during [...]
Think Fencing has been manufacturing PVC composite fencing for over a decade in Australia and has tested its fencing systems in the harshest of conditions. Think Fencing employs modern [...]
Yes, Think Fencing can make almost any gate design you want, Swing gates can be made up-to 2.4m each panel and sliding gates can be made up-to 6m long! All gates come with hardware made by [...]
Think Fencing has a dedicated design and fabrication division that is equipped to assist you with all aspects of design and manufacture. If you have an idea we can make it a reality. Just send a [...]