Does a professional need to install my fence?
Our fences are suitable for DIY. The most challenging part is to concrete posts into the ground and level the fence. After that everything simply “locks in”. Any fencing contractor or “handy” [...]
Our fences are suitable for DIY. The most challenging part is to concrete posts into the ground and level the fence. After that everything simply “locks in”. Any fencing contractor or “handy” [...]
Think Fencing is happy to accommodate any variations including picket or rail spacing. Simply let the design team know and they will provide a price.
The colours we use on our fencing products are not just a coating, they are a specific layer of Mechanically and Chemically bonded polymer that has been incorporated into the profile during [...]
Think Fencing has been manufacturing PVC composite fencing for over a decade in Australia and has tested its fencing systems in the harshest of conditions. Think Fencing employs modern [...]
Yes, Think Fencing can make almost any gate design you want, Swing gates can be made up-to 2.4m each panel and sliding gates can be made up-to 6m long! All gates come with hardware made by [...]
Think Fencing has a dedicated design and fabrication division that is equipped to assist you with all aspects of design and manufacture. If you have an idea we can make it a reality. Just send a [...]
All of Think Fencing’s coloured products are made from a PVC acrylic composite, the PVC makes up the structure of the profile and the Acrylic capping layer provides the colour. This is very [...]
First mark out the correct Gatepost location. Place the post in the hole and mark out the hinge location. Fit the hinge to the post making sure you have sufficient adjustment to correctly [...]
First mark out the correct post spacing. Next augur or dig a hole 300mm wide by 650mm deep. Fill the hole with a wet mix concrete mix and push the post into the concrete mix allowing the mix to [...]