Faqs

The Cladding has a tongue and groove section that pushes together making a solid join.  For additional water sealing you can run silicon down the groove section before inserting the next piece.

PVC can simply be cut using a hacksaw or a circular saw with an Aluminium blade

Think Fencing has been manufacturing PVC composite materials for over a decade in Australia and has tested its products in the harshest of conditions. Think Fencing employs modern technologies [...]

Yes, Think Fencing can make almost any gate design you want, Swing gates can be made up-to 2.4m each panel and sliding gates can be made up-to 6m long! All gates come with hardware made by [...]

Think Fencing has a dedicated design and fabrication division that is equipped to assist you with all aspects of design and manufacture. If you have an idea we can make it a reality. Just send a [...]

All of Think Fencing’s coloured products are made from a PVC acrylic composite, the PVC makes up the structure of the profile and the Acrylic capping layer provides the colour. This is very [...]

Using a Knife, strip away 20mm of conductive plastic exposing the wire inside. Using a wire joiner screw your active wire from your electric fence energizer into the exposed wire. Make sure your [...]

Zappa Rail and Equirail can be easily joined with our Stainless Steel Joining bracket. Alternatively Zappa Rail can be joined using 2 Gripples.

After you have installed your posts and strainer assembly you bolt your Insul-Strainer to your end post and slide the Zappa Rail into it. Using a Shifting Spanner or 20mm Spanner crank the [...]

First mark out the correct Gatepost location. Place the post in the hole and mark out the hinge location. Fit the hinge to the post making sure you have sufficient adjustment to correctly [...]