All of Think Fencing’s coloured products are made from a PVC acrylic composite, the PVC makes up the structure of the profile and the Acrylic capping layer provides the colour. This is very important as coloured PVC that is not capped will fade very fast. Whilst we use the best products available today a 10-year-old fence will not look like a 10-week-old fence. (It will however look significantly better than a 10-year-old timber fence)
Think Fencing has been manufacturing PVC composite fencing for over a decade in Australia and has tested its fencing systems in the harshest of conditions. Think Fencing employs modern technologies and polymers to create the best fencing systems possible, and has tested them to in excess of 50 years. If a manufacturing defect is found within the life of the product Think Fencing will replace it.
PVC can simply be cut using a hacksaw or a circular saw with an Aluminium blade
The Cladding has a tongue and groove section that pushes together making a solid join. For additional water sealing you can run silicon down the groove section before inserting the next piece.
The colours we use on our fencing products are not just a coating, they are a specific layer of Mechanically and Chemically bonded polymer that has been incorporated into the profile during manufacture. The result is colour that is durable, and is scratch and scuff-resistant.
Our fences are suitable for DIY. The most challenging part is to concrete posts into the ground and level the fence. After that everything simply “locks in”. Any fencing contractor or “handy” person should easily be able to install our fencing. Think Fencing provides detailed installation instructions and our staff are always happy to assist with any questions or concerns you or your installer may have.
